Eos,
What you need is one PC output at high resolution going into a little black box. The output from that box is divided into four smaller images. These would be top left, top right, bottom left, bottom right and each section of image is shown on the corresponding monitor.
I just Googled 4 port video splitter and came up with this:
http://www.superwarehouse.com/StarTech_4_Port_VGA_Video_Splitter,_Distribution_Amplifier/ST124L/p/1486891
BEWARE I don't know if this does what you want it to so check. This one may put the SAMEimage on four screens, which you DONT want.
Check what YOU WANT it to do - I'm still a little unsure as to what you are after but this is a good starting place. Keep an eye on what the signals in and out are for such devices MAKE SURE they are compatible with your PC output and Monitor Inputs.
I would email them to ask if this box allows you to take ONE PC output at say HD (1920 x 1080) or whatever and have it displayed across all four monitors in a 2 x2 video wall effect with the output across all four monitor as if it is one image split into four pieces (if thats what you are after)
IPete2.
What you need is one PC output at high resolution going into a little black box. The output from that box is divided into four smaller images. These would be top left, top right, bottom left, bottom right and each section of image is shown on the corresponding monitor.
I just Googled 4 port video splitter and came up with this:
http://www.superwarehouse.com/StarTech_4_Port_VGA_Video_Splitter,_Distribution_Amplifier/ST124L/p/1486891
BEWARE I don't know if this does what you want it to so check. This one may put the SAMEimage on four screens, which you DONT want.
Check what YOU WANT it to do - I'm still a little unsure as to what you are after but this is a good starting place. Keep an eye on what the signals in and out are for such devices MAKE SURE they are compatible with your PC output and Monitor Inputs.
I would email them to ask if this box allows you to take ONE PC output at say HD (1920 x 1080) or whatever and have it displayed across all four monitors in a 2 x2 video wall effect with the output across all four monitor as if it is one image split into four pieces (if thats what you are after)
IPete2.