How do you get pub.freeprocess to read i/o ??

BlitzMax Forums/BlitzMax Programming/How do you get pub.freeprocess to read i/o ??

SebHoll
 #1
That's strange... :S

I get the following output with my example:

Building untitled1
Compiling:untitled1.bmx
flat assembler  version 1.66
3 passes, 1331 bytes.
Linking:untitled1.exe
Executing:untitled1.exe

IPConfig Status: 1
================================

Windows IP Configuration


Ethernet adapter Bluetooth Network Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : 

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . : 
   Link-local IPv6 Address . . . . . : fe80::4421:1aff:cfaa:edc3%9
   IPv4 Address. . . . . . . . . . . : 192.168.0.10
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.0.1

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . : 
   Link-local IPv6 Address . . . . . : fe80::d564:795d:124b:6178%8
   IPv4 Address. . . . . . . . . . . : 192.168.0.8
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.0.1

Tunnel adapter Local Area Connection* 7:

================================
IPConfig Status: 0


Process complete


What OS are you using? Also, what are the contents of C:\ipconfig.txt when you run ipconfig > "C:\ipconfig.txt" in the Command prompt normally.